The Compleat Sculptor
" You supply the talent, we'll supply the rest!" Since 1995

Steel Burrs

  • Dremel Engraving Cutters - Quality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals.

Image

Stock #
By Me!
201-105
201-106
201-107
201-108
201-109
201-110
201-111
201-113
Engraving Cutter - Set of 6 Burrs
Order #
Buy me
1363611

  • Dremel High Speed Cutters - High-speed cutters can be used for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastics and woods. Cutters #198 and #199 can be used to make small slots.

Image

Stock #
By Me!
201-100
201-114
201-115
201-116
201-117
201-118
201-121
201-124
201-125
201-134
201-144
201-190
201-191
201-192
201-193
201-194
201-196
201-199
High Speed Cutter - Set of 3 Burrs
Order #
Buy me
1363608


#628 Drill Bit Set

A set of seven high-speed drill bits made from high-grade steel. USES
- Ideal for drilling into soft materials.
TIPS
- For best results, insert an accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto.
- Secure objects to a stable surface while working.
- Do not use these bits for drilling into very hard materials, such as glass or ceramics.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed.
- Keep a light touch, letting the speed of the tool do the work. This helps your accessories last longer.

INCLUDES
- 1/32" drill bit (use #483 collet)
- 3/64" drill bit (use #483 collet)
- 1/16" drill bit (use #482 collet)
- 5/64" drill bit (use #481 collet)
- 3/32" drill bit (use #481 collet)
- 7/64" drill bit (use #480 collet)
- 1/8" drill bit (use #480 collet)
Order #
Buy Me!
201-628

Although we try to keep the most updated prices on our website, all prices are subject to change.
1-800-9-SCULPT