The Compleat Sculptor
" You supply the talent, we'll supply the rest!" Since 1995


This is an archived page on To visit our current website, click here.
For current products or to place an order, please visit our online store

Soma Foama 15 Flexible Silicone Castable Foam
Soma Foama 15 is a soft two-component platinum silicone castable foam that is versatile and easy to use. Mixed 2 Parts A:1Part B by volume, foam can be poured into a mold or over other surfaces. Pot life (working time) is 50 seconds at room temperature (73°F / 23°C) and handling time is 20 minutes at room temperature and full cure is 1 hour.
Foam expands 4 times its original volume and develops a uniform 15 lb./cu. ft. cell structure (240 kg/m³). Vibrant colors can be achieved by adding Silc-Pig silicone color pigments. Cured foam is high heat resistance (will resist up to 350°F / 176°C), water resistant, UV resistant and resists oxidation and ozone degradation. Applications; Soma Foama 15 can be used for a variety of industrial and special effects applications including making foam filled appliances, padding/seat cushioning, orthotics/orthopedics, potting and encapsulation of electrical circuits and vibration dampening. Soma Foama 15 - 2 Parts A:1Part B by volume.
Order #
1 Quart Kit
3 Gallon Kit

Ecoflex Supersoft Silicone
Ecoflex Rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex Rubbers are mixed 1A:1B by weight or volume and cure at room temperature with negligible shrinkage. Rubber also cures without a "tacky" surface. Low viscosity ensures easy mixing and de-airing, or you can choose to mix and dispense using our convenient dispensing cartridges.
Cured rubber is very soft, very strong and very "stretchy", stretching many times its original size without tearing and will rebound to its original form without distortion. Ecoflex Rubbers are water white translucent and can be color pigmented with Silc-Pig pigments for creating a variety of color effects. Ecoflex 00-30 - Shore 00-30 hardness (below the Shore A scale)
Order #
1 Pint Kit
2 Gallon Kit

Psycho Paint
Psycho Paint™ - is a two component platinum silicone that is pigmented with Silc-Pig™ silicone pigments and then thinned with a solvent to make a paint that readily adheres to any cured platinum silicone. The mixture is applied using a brush or an air brush to a model’s surface. Until now, people have colored their creations with a paint made of Dragon Skin™ (or Ecoflex™) and Silc-Pig™ pigments. These products however have high viscosities that limit what you can achieve.
Order #
8oz Kit
1 Pint Kit
2 Gallon Kit

Layers of Psycho Paint can quickly create spectacular skin effects that last as long as the appliance.
  • Psycho Paint™ Advantages - Psycho Paint™ has a low viscosity that allows it to be delivered to a model’s surface with an air brush. A lower viscosity also makes Psycho Paint™ easier to control. Psycho Paint™ layers on better and stays where you put it. The lower viscosity also allows you to spray Psycho Paint™ using an air brush and makes paint effects (like "stippling") easier to achieve. Psycho Paint™ is also faster curing and it adheres very well to itself and other platinum silicones.
  • Psycho Paint Part A and Part B are measured in equal amounts into a mixing container. Start with a small amount. You can add more if needed.
  • Two parts of Toluene are added for airbrushing.
  • Psycho Paint is colored with Silc Pig pigments.
  • Components are mixed to a uniform color.
  • Psycho Paint is dispensed into an airbrush (available at many hobby shops).
  • Paint is applied evenly by moving the airbrush back and forth.
  • A little Psycho Paint goes a long way. Different colored layers can be applied to create color effects.
  • More Psycho Paint is mixed and applied with a brush.
  • Psycho Paint adheres well and can be stretched or flexed without delaminating or cracking. Great for repetitive motion applications.


Although we try to keep the most updated prices on our website, all prices are subject to change.