This kit comes with:

• Trial Kit Rebound 25 Molding Rubber
• Trial Kit Smooth-Cast 300 Casting Resin
• Plasti-Paste Support Shell Plastic
• 1 oz. Sonite Wax Release
• Thi-Vex II Silicone Thickener
• How-To Booklet, How-To DVD plus Quick Start Guide

Dragon Skin 10 MED is suitable for many special effects application, especially animatronics where repetitive motion is required.

Dragon Skin 10 MED is high performance platinum cure silicone rubbers that can be mixed 1A:1B by weight or volume and cures at room temperature with no shrinkage to a Shore 10A. Cured Dragon Skin 10 MED is very soft, very strong and very “stretchy”. It will stretch many times its original size without tearing and will rebound to its original form without distortion.

Dragon Skin 10 MED is suitable for many special effects applications, especially animatronics where repetitive motion is required. It is water white translucent and will accept pigments for creating color effects or for creating a paint that can be painted on to an existing Dragon Skin 10 MED (or other) silicone surface. Because of the superior physical properties and softness of Dragon Skin 10 MED , it is also used for orthopedic & cushioning applications. Dragon Skin 10 MED has a pot life of 20 minutes and a demold time of 5 hours.

In A Hurry? Dragon Skin 10 FAST (formerly Dragon Skin Q) has a pot life of 8 minutes and a demold time of 75 minutes.(see below)

All the same characteristics as the Dragon Skin regular but... In A Hurry? Dragon Skin 10 FAST has a pot life of 8 minutes and a demold time of 75 minutes.

PlatSil® 71 Series RTV Silicone Rubbers are two-component, addition-cure, platinum-catalyzed, high tear strength, flexible mold compounds. They have tough knotty tear strength which make them especially valuable to the mold making industry. They are recommended for evaluation as mold materials for polyester, epoxy, polyurethane resins, waxes and many other materials. PlatSil® 71 Series Silicones are preferred because on curing, they don't shrink, they don't produce alcohol like tin-catalyzed silicones which can inhibit urethane castings, and they can be heat accelerated to speed the cure.

New PlatSil® Gel-10 allows you to formulate your own soft silicone from the basic Shore A-10 hardness rubber. PlatSil® Gel-10 is colorless, translucent and rapid curing with surprising tear strength. When used with up to 250% Smith’s Theatrical Prosthetic Deadener, PlatSil Gel-10 can be made to simulate human tissue.

Mold Star 15 cures overnight to a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Mold Star 15 is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
Note: This product will not work with modeling clays containing sulfur under any circumstances.

Rubber clarity is especially useful when extracting models via cutting. SORTA-Clear rubber is ideal for making prototype, jewelry or other molds of any configuration where model visibility is important (i.e. extracting a model from the mold via cutting).

Resins (urethane, epoxy, etc.), wax and low melt metal alloys can also be cast into SORTA-Clear. SORTA-Clear can also be cast into platinum silicone (release agent required) or rigid molds for casting translucent prototype parts, etc. SORTA-Clear can be pigmented with SILC Pig silicone pigments.

An easy to use versitile rubber that allows you to make rapid-curing molds. The 1:1 mix makes it easy to use without a scale. The quick cure may be slowed by the addition of Platsil Retarder.

PlatSil® 71 Series RTV Silicone Rubbers are two-component, addition-cure, platinum-catalyzed, high tear strength, flexible mold compounds. They have tough knotty tear strength which make them especially valuable to the mold making industry. They are recommended for evaluation as mold materials for polyester, epoxy, polyurethane resins, waxes and many other materials. PlatSil® 71 Series Silicones are preferred because on curing, they don't shrink, they don't produce alcohol like tin-catalyzed silicones which can inhibit urethane castings, and they can be heat accelerated to speed the cure.

Dragon Skin 30 is compatible with other Dragon Skin rubbers and is suitable for special effects, prosthetic and other applications. Color can be added with Silc Pig color pigments. This rubber can be thickened with Thi-Vex thickening agent or thinned down with Silicone Thinner.

Dragon Skin 30 is also suitable for making molds of any configuration for casting plasters, concrete, wax, low-melt temperature melt metal alloys, resins and other platinum silicones (release agent required).

P-44 is a translucent, medium viscosity, high tear strength, platinum-catalyzed, RTV-2 silicone rubber, which was designed for casting parts where visual inspection is required. It is easy to mix and de-air, and will cure with virtually no shrinkage. The speed at which the rubber hardens can be dramatically accelerated with heat or with PT Accelerator at room temperature.

Addition-cure two component silicone rubbers exhibit excellent chemical and heat resistance, but may show some inhibition sensitivity. P-44 is supplied with 2 Activators: P-44A (1) is used for production molds, which P-44A (2) is used for casting clear parts. P-44 is extremely useful for prototype application where superior mechanical properties are required.

Rubber clarity is especially useful when extracting models via cutting. SORTA Clear rubber is ideal for making prototype, jewelry or other molds of any configuration where model visibility is important (i.e. extracting a model from the mold via cutting). Materials such as urethane, epoxy or polyester resins can be cast into SORTA Clear silicone without application of a release agent. Other materials such as wax and low melt metal alloys can also be cast into SORTA Clear. SORTA Clear can be pigmented with SILC Pig silicone pigments.

Want a Clear Silicone? This is it! Shim lines and piece detail are easily viewed through this silicone, which makes cutting much easier. Many people are actually using this material as a casting medium for all types of clear flexible pieces. It has great resiliency and longevity. It can also be pigmented for seam identification or casting enhancement.

PlatSil® 71 Series RTV Silicone Rubbers are two-component, addition-cure, platinum-catalyzed, high tear strength, flexible mold compounds. They have tough knotty tear strength which make them especially valuable to the mold making industry. They are recommended for evaluation as mold materials for polyester, epoxy, polyurethane resins, waxes and many other materials. PlatSil® 71 Series Silicones are preferred because on curing, they don't shrink, they don't produce alcohol like tin-catalyzed silicones which can inhibit urethane castings, and they can be heat accelerated to speed the cure.

PlatSil 73-45 are low-viscosity, high strength platinum products. PlatSil 73-45 is often the rubber of choice for casting polyurethane foam parts because of its very high tear strength, mid-range
hardness, flexibility and excellent chemical resistance. Liquid additives are available for thickening to make brushed molds, for thinning to soften the rubber or for accelerating the cure.