Foam Coating Materials
 

Please feel free to contact our Technical Support hotline at 212-367-7561
or email us at mosaics@sculpt.com if you need assistance.

 

Aquaresin

AquaResin

  • AQUA-RESIN® is an easy to use, non-toxic sculpting resin. This water-based composite material can be used in casting, molding or as a foam coat. It is primarily used with fiberglass reinforcement.

    Permanent in all interior as well as most exterior applications, it has numerous uses in such diverse fields as scenic design, architecture, sculpture, and prototype and product development.
To Order Click Here
To See AquaResin Projects
Click Here - coming soon

Winterstone

Winterstone

  • WINTERSTONE is a white, dry powder mix --- a complex multi-component cementitious mixture --- which when mixed with the necessary water produces a modeling medium of clay-like consistency. It stiffens and hardens gradually and continuously. It works as easily as clay and sets as hard as stone.
To Order Click Here
To See Winterstone Projects
Click Here

Hot Wire Foam Coat

Foam Factory Foam Coat

  • Interior& Exterior foam coat. It can also be mixed into a paste form to fill in cracks and holes. Just add water to this powder and paint it over the foam surface. Easy clean-up with soap and water.
To Order Click Here
To See Foam Factory Foam Coat Projects
Click Here

Magic-Smooth

Magic-Smooth

  • This two-part epoxy is similar in use to Magic-Sculp but it has a thinner consistency (similar to Vaseline). Easily smoothed with water to a glassy finish, Magic-Smooth is an ideal foam coat!
To Order Click Here
To See Magic-Smooth Projects
Click Here - coming soon

Please feel free to contact our Technical Support hotline at 212-367-7561 or email us at mosaics@sculpt.com if you need assistance.

- Top -