New Reducing urethane product for easily sculpture reducing. |
|
|
-
HydroShrink is a unique single component, flexible, 100% solids (contains no V.O.C.), polyurethane elastomeric compound. HydroShrink, when fully cured provides for simple method for reducing three dimensionally molded parts. Reduction of parts is done by simply molding the part with HydroShrink to form a rubber master. After curing 30 minutes at room temperature the molded HydroShrink part is removed from the mold and allowed to shrink at room temperature. Full reduction is 51 % the original part i.e. (a 12 inch part will reduced to 6.12 inches). Full reduction of parts can be achieved in 5 to 14 days depending on cross section thickness of the part. Thicker cross sections take longer while thinner cross sections require less time. Click here for Tech Sheet.
|
Order # |
Size |
Price |
Buy me |
3196403 |
1 quart |
$36.99 |
|
3196404 |
1 gallon |
$129.99 |
|
We strongly recommend the use of Dry Gas Blanket when storing unmixed HydroShrink. |
|
| HydroShrink™ was created for artists wanting a fast economical way to reduce items. Sculpting smaller versions of objects is tedious and time consuming. With HydroShrink™ you can simply make silicone molds from objects and directly reduce them. When parts cast from HydroShrink™ are left to dehydrate they accurately decrease in size. By making smaller silicone molds from the reduced HydroShrink™, you can produce a series of progressively smaller molds. The result is exponential reduction of your original shape. |
