Large Clay Extruder
 |
This clay extruder gun comes with 4 aluminum dies tat are packed in the front barrel. Simply unscrew the front lug to remove the 4 dies. 3 dies are precut for immediate use and the third is blank allowing you to create your own design. The barrel is 15-1/2in. long x 2-1/2in. diameter. The whole gun in 20.5" long. |
Order # |
Price |
Buy me |
#393LCEG |
$35.00 |
|
To load from the front, push the silver
tab on the handle while pulling on the round
plunger. You can load clay from the back of the barrel whichever is easiest
for you. Place
your aluminum die in the front, inside the lug, and then screw the lug
into the barrel.
For maximum leverage, hold the trigger from the bottom, squeeze then
release it only
half way, then squeeze again. Releasing the handle half way you will obtain
consistent
and maximum power.
Remember to clean your gun and dies after each use.
